Pivot Joint GE ST - F 80
Application
Applicable as a bracing element for single-arm cantilevers supported from primary steelwork or concrete surfaces, also for the knee-brace reinforcing of all siFramo 80 frame constructions. The pivot can be installed with angles from 25° to 155°.
Scope of delivery
Pivot Joint GE ST - F 80 with pre-attached base plate
Installation
Attachment of the Joints to steel structure by means of Assembly Set MS 5P M12 S while connecting the base plate. Ab Typ 161/200 erfolgt die Befestigung über das Montageset MS 5P M16 S. Another option is to fix the Joint to concrete walls by means of 4 heavy-duty anchors. The support profile TP F 80 plugged onto the octagon is attached by means of 4 Self Forming Screws.
After installation at the desired angle the screws have to be tightened with 29.50 lbf/ft (40 Nm).
By loosening the screw connection between Joint and Joining Plate it is possible to rotate the Joint by 90° and to use it for a cross member then (see figure 4).
Technical Data
| Typ | Height H [in] | Length L [in] | Width B [in] | Angle α |
|---|---|---|---|---|
| GE 80/120-F 80 | 140 | 220 | 220 | 25° - 155° |
| GE 121/160-F 80 | 140 | 320 | 260 | 25° - 155° |
| GE-Q 121/160-F 80 | 140 | 320 | 260 | 25° - 155° |
| GE 161/200-F 80 | 140 | 320 | 310 | 25° - 155° |
| GE-Q 161/200-F 80 | 140 | 320 | 310 | 25° - 155° |
| GE 201/310-F 80 | 140 | 220 | 420 | 25° - 155° |
| GE-Q 201/310-F80 | 140 | 220 | 420 | 25° - 155° |
| Typ | Height H [mm] | Length L [mm] | Width B [mm] | Angle α |
|---|---|---|---|---|
| GE F 80/120 - 80 | 140 | 220 | 220 | 25° - 155° |
| GE F 121/160 - 80 - 1 | 140 | 320 | 260 | 25° - 155° |
| GE F 161/200 - 80 - 1 | 140 | 320 | 310 | 25° - 155° |
| GE F 201/310 - 80 - 1 | 140 | 220 | 420 | 25° - 155° |
| Material: | Steel, HCP |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Approvals / Conformity
