Weld-on Eye Plate HPA
Application
Weld-on Eye Plate to primary steel beam sections and steel plates. The Weld-on Eye Plate serves as a basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes 3/8" (M10) up to 5/8" (M16) rod and Pipe Clamps type Stabil Form C LK. It may also be welded directly to the Welding Plates type SPL if required.
Installation
Align the Weld-on Eye Plate to the primary steel section and weld in place. The Weld-on Eye Plate can be welded directly without prior treatment due to a weldable corrosion-resistant coating (no zinc impurity to weld).
Recommended fillet weld 3/16" (4mm) thick (throat thickness = 3/16" (4mm))
Technical Data
| Type | max. perm. tensile load kip | max. perm. tensile load [kN] |
|---|---|---|
| M10 | 2.52 | 11.2 |
| M12 | 2.72 | 12.1 |
| M16 | 2.81 | 12.5 |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
| Type | L [in] | B [in] | S [in] | D [in] |
|---|---|---|---|---|
| M10 | 2 9/16" | 1 3/4" | 5/16" | 7/16" |
| M12 | 2 9/16" | 1 3/4" | 5/16" | 1/2" |
| M16 | 2 9/16" | 1 3/4" | 5/16" | 11/16 |
| Type | L [mm] | B [mm] | S [mm] | D [mm] |
|---|---|---|---|---|
| M10 | 65 | 45 | 8 | 11 |
| M12 | 65 | 45 | 8 | 13 |
| M16 | 65 | 45 | 8 | 17 |
| Material: | Steel, HCP |